Built and used inside SMEDTEC, a working regulatory consultancy.

Guide · Post-market

How often do you update a PSUR or a PMS report under the EU MDR and IVDR?

Under the EU MDR, class I devices need a PMS report updated when necessary; class IIa devices need a PSUR updated when necessary and at least every two years; class IIb and class III devices need a PSUR updated at least annually. Under the IVDR, class A and B devices need a PMS report updated when necessary, and class C and D devices a PSUR updated at least annually. PSURs for MDR class III and implantable devices, and for IVDR class D devices, go to the notified body through the electronic system for its evaluation.

Last reviewed 19 November 2026 · SMEDTEC

EU MDR: Articles 85 and 86

Article 85: manufacturers of class I devices prepare a PMS report summarising the results and conclusions of their PMS data, with any preventive and corrective actions. It is updated when necessary and made available to the competent authority on request.

Article 86: manufacturers of class IIa, IIb and III devices prepare a PSUR for each device, or each category or group of devices, setting out the benefit-risk conclusions, the main PMCF findings and the volume of sales with an estimate of the population using the device. Class IIb and III: at least annually. Class IIa: when necessary and at least every two years. For class III and implantable devices the PSUR goes through the electronic system to the notified body, which adds its evaluation; for the others it is made available to the notified body and, on request, to competent authorities.

EU IVDR: Articles 80 and 81

Article 80: manufacturers of class A and B devices prepare a PMS report, updated when necessary and made available to the notified body and the competent authority on request.

Article 81: manufacturers of class C and D devices prepare a PSUR, setting out the benefit-risk conclusions, the main PMPF findings and the volume of sales, updated at least annually. For class D devices it goes through the electronic system to the notified body for its evaluation.

Legacy devices too

Devices still on the market under the transitional provisions follow the MDR's and IVDR's post-market surveillance requirements, not the directives' (MDR Article 120(3d); IVDR Article 110(3d)).

The European Commission proposed a targeted revision of the MDR and IVDR in December 2025. At the date this page was reviewed it had not been adopted, so the rules below still apply; check whether that has changed before you rely on them.

Keeping the cycle on time

A PSUR is late long before its due date: data collection, PMCF or PMPF inputs, sales figures and review all have to happen first. In SMEDTEC OS, a post-market surveillance programme starts when a product goes on sale, with its first cycle due a year later. You set each cycle's due date to the frequency that applies to the device, and each cycle shows on the calendar with a notification seven days before it falls due and again if it is overdue. SMEDTEC OS does not work out the frequency from the device's class: that stays your decision.

PMS reports and PSURs by class

PMS reports and PSURs by class
RegulationClassDocumentUpdate
EU MDRClass IPMS report (Art. 85)When necessary
EU MDRClass IIaPSUR (Art. 86)When necessary, at least every two years
EU MDRClass IIb and IIIPSUR (Art. 86)At least annually
EU IVDRClass A and BPMS report (Art. 80)When necessary
EU IVDRClass C and DPSUR (Art. 81)At least annually

A good fit for

  • Manufacturers with several devices whose post-market cycles fall at different times
  • Teams who want each cycle's due date, owner and evidence in one place

Not the right tool for

  • Writing the PSUR or analysing PMS data: SMEDTEC OS schedules and holds the work, it does not produce the report

Questions regulatory teams ask

Common follow-up questions

Read the guides

Does a class I device need a PSUR?

Not under the EU MDR. Class I devices need a PMS report under Article 85, updated when necessary. PSURs start at class IIa (Article 86).

Does SMEDTEC OS set the PSUR frequency for me?

No. The first cycle is created a year after the product goes on sale; you set each cycle's due date to the frequency that applies to the device.

See it on your own products.

Create a workspace and bring in your first device. Free 14-day trial, no card needed.