Built and used inside SMEDTEC, a working regulatory consultancy.

Guide · Great Britain

What does a manufacturer need to sell a medical device in Great Britain?

A manufacturer based outside the UK appoints a UK Responsible Person, who registers its devices with the MHRA and acts on its behalf; every device, including IVDs, custom-made devices and systems or procedure packs, must be registered before it is placed on the Great Britain market. CE marked devices are accepted, and on 21 October 2026 the government confirmed it will continue to accept them on a long-term basis, with legislation to follow. UKCA marking remains the domestic route. Northern Ireland follows the EU MDR and IVDR.

Last reviewed 19 November 2026 · SMEDTEC

The UK Responsible Person

If the manufacturer is based outside the UK, it must appoint a UK Responsible Person to register its devices and act on its behalf, and give them written evidence of that authority. Importers and distributors do not appoint one. The UK Responsible Person's details, and any change to them, are part of the device registration.

Registering with the MHRA

All medical devices, including IVDs, custom-made devices and systems or procedure packs, must be registered with the MHRA before they are placed on the Great Britain market. A device that is not registered cannot lawfully be placed on that market.

CE marking and UKCA

Great Britain accepts CE marked devices. On 21 October 2026 the government announced that it will continue to accept CE marked medical devices and IVDs on a long-term basis, and that UKCA continues as the domestic approval route; the legislation to give effect to it had not been made at the date of this review. Until it is, the MHRA's guidance gives the current dates: devices under the EU MDR or IVDR are accepted until 30 June 2030, and devices under the old directives until the earlier of certificate expiry or 30 June 2028 (30 June 2030 for the IVD Directive).

Great Britain has its own post-market surveillance requirements, in force since 16 June 2025, alongside whatever the EU requires of the same device.

Northern Ireland

The EU MDR has applied in Northern Ireland since 26 May 2021 and the IVDR since 26 May 2022. CE marking is required, with the UKNI indication where a UK notified body carried out the assessment, and a manufacturer based in Great Britain appoints an EU or Northern Ireland based authorised representative.

Keeping the UK record in one place

In SMEDTEC OS the GB registration hangs off the same product record as the EU and US ones, with its registration number, status and the responsible person recorded against it, typed as a UK Responsible Person. Your UK Responsible Person is a record in Representatives, with its agreement and the agreement's expiry date; SMEDTEC OS raises that date before it falls due, and you can bring the UK Responsible Person into your workspace read-only.

A good fit for

  • Manufacturers outside the UK selling into Great Britain through a UK Responsible Person
  • UK manufacturers selling the same device into Great Britain, Northern Ireland and the EU

Not the right tool for

  • Registering devices with the MHRA: that is done in the MHRA's own system, by the manufacturer or its UK Responsible Person

Questions regulatory teams ask

Common follow-up questions

Read the guides

Do I still need UKCA marking for Great Britain?

Not if your device is CE marked under the EU MDR or IVDR, under the arrangements in place at the date of this review and the October 2026 announcement. UKCA remains available as the domestic route. Confirm the current position on GOV.UK before relying on it.

Does SMEDTEC act as a UK Responsible Person?

SMEDTEC's consultancy offers UK Responsible Person appointments; ask us. SMEDTEC OS itself works the same whoever your UK Responsible Person is.

See it on your own products.

Create a workspace and bring in your first device. Free 14-day trial, no card needed.